Home - Product - Waterproof Coating - True Ceramic Glue
True Ceramic Glue

True Ceramic Glue

True ceramic glue is a new type of decorative material suitable for indoor wall, floor tile filling, kitchen and bathroom bathroom and wall cabinet corner decoration. This product is made of imported environmentally friendly raw materials and is developed from epoxy resin polymer. After curing The formed coating film can effectively solve various problems of tile gaps.

Description

Product advantages

1. It can be bonded into a whole with a variety of substrates, and has good adhesion; 

2. After curing, the appearance is colorful, good gloss, waterproof and moisture-proof, non-toxic and tasteless, anti-mildew and bacteria-proof, and environmentally friendly View, easy to scrub and clean, effectively solve various problems of tile gaps;

3.Super stain resistant, durable, hard as porcelain and tough, not collapse or shrink.


The scope of application

1. The functions of gap filling, mildew proof, waterproof and decoration of ceramic tiles, mosaics, stone, wood, glass and other materials;

2. All the gaps in the floor and wall of the kitchen, bathroom, living room, dining room, bedroom, office, office building, hotel and other places;


Construction technology

1 )Clean the channel before construction to ensure that the gap is clean and dry, free of oil, dust and other debris, to avoid uneven surface after construction and easy to    peel off. Paste masking paper or adhesive tape on the seam of the slot, and then construct;

2)Before the formal construction with the glue gun, shoot out about 30cm of rubber and discard it to ensure that the AB rubber is fully mixed and uniform;

3)Glue along the gap, and the diameter of the glue outlet should be smaller than the width of the gap to avoid wasting too much glue;

4)After the glue is applied, use a binder ball to squeeze and straighten the tape. Just tear off the masking paper or tape before the glue is dry. If there is any spilled glue, wipe it with alcohol or shovel it off with a spatula after the glue is cured;

5 )After standing for 3-5 hours, it will show initial solidification. After 24 hours, it can    be put into use. It takes 72 hours for complete solidification. Do not soak or splash the surface of the colloid before solidification;


Matters needing attention

1. The construction temperature is 6-40℃;

2. During the construction process, the glue in the mixed glue nozzle should not stay for more than 20 minutes, otherwise it will solidify, and a new glue nozzle needs to be replaced next time you use it;

3. This product is not suitable for direct sunlight. For example, when the temperature is lower than 10℃, soak the product in hot water for 10-20 minutes or heat it with a hair dryer for 5-10 minutes to make the glue better;

4. For unused glue, unscrew the mixed glue nozzle, wipe off the excess glue at the front, and screw the cover. The glue nozzle can be replaced during the warranty period to continue using.


none
Related Tags : Waterproof Coating

Reach Us and Our Team Are Ready to Help

Guangdong Huolun Building Materials Technology Development Co., Ltd. is a manufacturer engaged in the R&D, production, and sales of waterproof materials and related auxiliary materials for construction. Our main products cover waterproof coating, heat insulation coating, metal anti-rust paint, and so on.

Leave A Message

Guangdong Huolun Building Materials Technology Development Co., Ltd.

Speciliazed in R&D, production, and sales of waterproof materials

Get in Touch

We love question and feedbacks-and we’re always happy to help! Send us a message and we’ll respond as soon as possible.

Copyright © 2015 Guangdong Huolun Building Materials Technology Development Co., Ltd. All Rights Reserved.            Privacy Policy Powered by Bontop