Anti-radiation Heat Insulation Coating

Product advantages

1. Building insulation application: building layer, building steel structure roof etc., painting 1-2mm;

2. The thick anti-radiation heat insulation coating can reduce the exterior temperature of the building by 20 ° C-30 ° C, and the internal temperature by 8 ° C-10 ° C, while improving the protection of the base layer, preventing metal corrosion to a certain extent, and extending service life;

3. Brushing on the inner wall of the building can prevent the generation of condensed water, prevent the wall from being mouldy and hairy, and has the functions of heat preservation and waterproofing;

The scope of application

It is suitable for new and existing concrete roofs, asphalt-based roofs, etc., especially for the maintenance and protection of metal roofs, and color steel anti-rust and heat  insulation.

Construction technology

1) The base layer should be firm, no cracking, no powder, no sand, no hollowing, no oil, no peeling, no old coating with poor adhesio, cracked or uneven base surface should be filled with cement mortar Construction will be done after filling;

2) There is no rust on the metal surface. If there is rust, first paint it with “ Ke Xiu Ling ” products and then dry it to avoid coating delamination due to rust shedding;

3)  Stir  evenly  after  opening  the  lid.  If  there  is  some  layering,  stir  evenly  without affecting the use effect. You can roll brush or use professional equipment to spray;

Matters needing attention

1. This product is suitable for use in an environment of 5℃ ~ 40℃ . It must be protected from rain, hot sunlight and frost during the construction process;

2. During construction, do not mix different materials and use them. Unused materials should be sealed and used up within 15 days after opening the lid;

3. Store in a cool and dry place to prevent sunlight, freezing and moisture; 

4. It is necessary to keep the subsequent drainage of the roof smooth;