Transparent Waterproof Sealant for Exterior Wall

Product advantages

1. The coating is colorless, transparent, and will not damage the original wall decoration effect after coating, and will not turn yellow or dust;

2. The coating film has good film-forming properties and has air permeability after film formation. It is suitable for thermal evaporation in the humid climate of the south without agitation; strong adhesion and toughness can resist the stress generated when the base layer is deformed and cracked;

3. Using water as the dispersion medium, it is non-flammable, non-toxic, tasteless,and does not pollute the environment. It is an environmentally friendly product; cold construction, safe operation, convenient construction, can be directly sprayed, painted, brushed, or scratched on the wall;

The scope of application

1. Waterproof repair of external wall leakage of various buildings;

2. It is applied to the waterproof treatment of the interface of various facing materials;

3. Waterproof and moisture-proof surface of various interior and exterior wall decoration materials;

Construction technology

1) The substrate must be firm, smooth, clean, free of dust, greasy, wax, release agent, etc. and other debris;

2) Cleaning the base surface, use detergent, wire brush, rag and other tools to clean the base surface; use a brush or roller to apply transparent waterproof glue to the wall and the joints of the facing bricks. Be especially careful when painting; general brushing 2-3 times are enough. When applying, pay attention to the first time that the coating is dry and not sticky to your hands, and then apply it again, and the brushing direction should be crisscrossed.

Matters needing attention

1. During construction, ensure that the product completely covers the base surface, and other operations can be carried out after 24 hours of curing;

2. The construction temperature should be above 5℃ , and no construction can be done in rainy or particularly humid environments;

3. In the occasions that require high wear resistance, such as pedestrian passages, a hardened layer is required to protect the film from damage;