Super Ceramic Tile Adhesive

Product advantages

Strong bonding force, material saving, safe and firm, avoiding hollowing or falling off; no need to soak bricks to wet the wall during construction, which can significantly improve work efficiency, convenient and fast; has good impermeability and anti-aging properties; elastic, It can absorb the expansion and contraction between the substrate and the ceramic tile, thereby prolonging the service life of the ceramic tile; the surface of the surface treatment substrate should be firm and flat, dry and clean, free of grease, no concrete curing agent,   release agent and other loose materials, loose and strong water absorption Can be wetted with water.

The scope of application

Suitable for indoor and outdoor cement batching and concrete paving of various types of ceramic tiles, clay bricks, clinker bricks, slates, marbles, natural stones, etc.

Construction technology

1) Pay attention to slowly pour the powder into the water while stirring. Mix the Shuanghong tile glue and water at a ratio of about 4:1 (25kg/bag, about 6~6.5kg of water to mix into a uniform paste. The effect of electric stirring is the best. Good. If the glue sits for ten minutes and then stir it to increase its strength;

2) Spread the glue on the working surface with a toothed scraper to make it evenly distributed, adjust the angle between the scraper and the working surface to control the thickness of the glue, apply about 1mm each time, and then knead the tiles on Just go on;

Matters needing attention

1) The verticality and flatness of the substrate must be confirmed before application;

2) Never mix the dried glue with water before use;

3) Pay attention to keep the expansion joints, step in or fill the joints 24 hours after the paving is completed;

4) The theoretical dosage is 2.5-4.5kg/㎡;