High Elastic Anti-cracking Coating

Product advantages

1.  It can be applied on wet and complex base surfaces, the coating film has no joints, and the integrity is strong;

2. Strong adhesion, high tensile strength, good extension performance,  and strong ability to adapt to cracking and deformation of the base layer; 

3.  Liquid construction, room temperature curing, convenient operation   and short construction period;

The scope of application

1. Waterproof treatment of roofs, walls, bathrooms, windowsills, etc. of new and old buildings;

2. Waterproof  and  moisture-proof  treatment  of  various  parts  of underground buildings;

3. It can be used on dry or wet concrete surface, metal, wood, gypsum board, SBS, APP, polyurethane surface, etc;

4. Sealing of expansion joints, partition joints, drains, wall pipes, etc;

Construction technology

1) The construction surface must be firm, smooth, free of dust, oil, and water;

2) Use a rubber scraper or roller brush for coating, usually two to three times. If the coating is too thick, add a proper amount of water and stir evenly for use;

3) For special parts, non-woven fabric or glass fiber cloth can be added between the middle layer and the upper layer to increase the strength of the coating;

Matters needing attention

1. Do not apply at temperatures below 4 ° C or in the rain, and do not apply in a particularly humid and unventilated environment, otherwise it will affect film formation;

2. After construction, all parts of the whole project should be carefully checked, especially the weak links, problems should be found, the reasons should be found out and repaired in time;