Fast Plugging King

Product advantages

1. Fastsetting and hardening,rapid strength development,and effectiveresistanceto waterpressure;

2. Leakage plugging withwaterand pressure,instantaneouswaterstop,can beconstructedonthewatersurface,simpleandconvenient;

3. Good workability and cohesiveness,easy for large-areaplasteringconstructhon

4. It has miero-oxpanslon,good impermeabllty,strong adhaslon,complate andfirm bonding withthebasesurface;

5. Non-toxic,harmless,non-aging,no pollution to waterqualityandsurroundingeovinonent

The scope of application

It is used to quickly stop leaking and stopping water at various parts of new and old buildings with large amounts of water on the base of various   masonry and concrete structures. It can reflect the excellent performance of rapid leak stop and water stop.

Construction technology

1. The substrate must be firm, clean, free of dust, greasy, wax, release agent, etc. and other debris;

2. Clean the base layer, remove the loose surface, and fill up the cracks and depressions in the base layer with cement or waterproof glue;

3. Take a small amount of powder according to the amount of the project, add water according to the weight ratio of powder: water = 10: 3.0-3.3, quickly stir and knead into a mass, and then quickly press into the cleaned and cleaned In the leaking cavity, press it for 3-5 minutes. If necessary, you can scrape and press the flexible waterproof slurry twice;

Matters needing attention

1. The proportion of water and powder can be adjusted appropriately according to the different substrates, weather and construction conditions;

2. The normal setting time may fluctuate due to the difference in water consumption and construction temperature;

3. There will be a lot of heat during condensation, so you should be careful to avoid burns;